2003 the Chevy Silverado is a popular pickup truck. The appearance of this vehicle is very diverse, combined with the ability to carry cargo, making it a top choice for households.
However, after a short period of use, some of its functions are not very good. This article shows you two common mistakes, 2003 Chevy Silverado and idles low and stalls.
What are Idles?
You will not be able to avoid the intersections while traveling in the city. When you step on the brakes and stop pressing the accelerator, its idles function helps maintain your vehicle readiness.
What are Stalls?
Stalls are situations in which the machine stops suddenly while traveling on the road for several different reasons. This error usually doesn’t happen while you are stomping on the gas pedal.
Instead, the stop of the gas pedal combined with low idles is the main cause of that situation.
Specifically, when the idles are low, and the car stops, the car’s engine rotation decreases so much that it cannot maintain the operating state. Therefore, the vehicle that comes to a sudden stop does not have enough power.
Check the car’s idles low status
When first used, the idle of the 2003 chevy Silverado is not low. The engine of this car revs about 1000 RPMs when the accelerator is not pressed, which helps to maintain its working state.
However, after a period of use, the idle function of this car gradually decreases. When traveling in an intersection, if you come across a traffic light or turn a corner, you will normally stop pressing on the accelerator.
When you do, pay attention to the carpet and see that the engine revs drop to around 300-400 RPMs.
Today, it is not difficult to identify vehicles falling into low idle status. Modern vehicles such as sophisticated engine computers help monitor fuel system performance, combustion, and emissions.
If idles low happens, your “Check Engine” light on the dashboard will light up.
One way to prevent automatic stalls
One way to stop your vehicle from stalling is to maintain the accelerator. When doing this, the engine revs are still as high as when the car is in motion, so the engine does not stop. However, this prolonged action is very harmful to the engine and requires you to pay attention to maintain the brake pedal to increase safety.
The cause of 2003 Chevy Silverado idles low and stalls
As a pickup line, Silverado always has to operate at high intensity to carry goods. Besides, the vehicle may have to drive on dusty roads. It even gets less maintenance than other family cars.
In conventional thinking, low idles can be caused by reduced motor rotation. The cause can come from the engine crankshaft due to increased friction. Increasing friction may come when the vehicle is operated for a while and dirt accumulates.
A dirty fuel injector can also cause this condition. When using the vehicle for a long time, this part may become stuck and dust. Therefore, the accelerator pedal helps the injector to work under great pressure.
Conversely, when not entering the gas, low pressure easily causes the fuel to jam, and the engine reduces rotation.
The error may appear on the EGR valve. This is an exhaust recirculation valve, which sends some of the engine’s exhaust into the intake system to reduce vehicle emissions.
Over time, the EGR valve may malfunction in the open or closed position. Meanwhile, the fuel-diluting exhaust also reduces engine efficiency when the accelerator is not depressed.
Conclusion
The above has explained from simple definitions of idles low and stalls.
We’ve covered some ways to help you temporarily prevent common conditions and causes. Even though the 2003 Chevy Silverado is a pickup truck, do regular maintenance to keep your car in check as a final tip.
