Home » Car » How To Remove Ignition Lock Cylinder Chevy Without Key?
How To Remove Ignition Lock Cylinder Chevy Without Key

How To Remove Ignition Lock Cylinder Chevy Without Key?

The problem with the key set is one of the problems that appear pretty standard and one of the worst problems we encounter. From the ignition to the engine or even devices such as the disc player, radio, or window that only work when you put the key in. How to remove ignition lock cylinder chevy without key? The following article will help you a lot when you fall into this dilemma.

What Is Ignition Lock Cylinder?

Contrary to our imagination, the Ignition lock cylinder doesn’t just have an external keyhole that we can manipulate.

In fact, this part is a long cylindrical rod with an exposed head, and inside are mechanical mechanisms that help us start the car’s components.

What Is Ignition Lock Cylinder
When you put the key in the keyhole, the internal components of the Ignition lock cylinder will begin to move, thereby triggering the vital elements to power the car.

In particular, the most typical can be mentioned the ignition system of the engine and battery or battery to generate power for the vehicle.

Signs Of Broken Ignition Lock Cylinder

The most obvious sign of a broken lock is the inability to turn or insert the key into the keyhole. In this case, the internal mechanical structures are stuck or fractured due to many causes.

Besides, if you can insert the key into the lock but have difficulty pulling it out or can’t get it out, it is also a sign that there is something wrong with the Ignition lock. If you are unfortunate enough to fall into this situation, it is best not to pull the key out because that action will directly affect the internal mechanisms.

Related posts:

Failure to start the engine and other parts of the vehicle is also a warning sign of failure of the lock. Although there are many different causes, such as overheating, engine damage, or oil leaks, the risk of a broken lock cannot be ruled out.

More specifically, if both the motor and the electrically operated components such as lights or horns stop working, there is a high chance of damage coming from the Ignition lock.

In addition, if using Toyota models, the engine problem likely comes from the immobilizer, another quality anti-theft part. So to be more sure of the test, you need to know how to deactivate Toyota immobilizer.

Is It Possible To Fix It Yourself At Home?

You can handle damaged locks yourself without a key, provided that you have all the necessary tools and manipulation skills. Just like repairing many other types of damage, a problematic lock will require a range of specialized tools, from simple to complex to perform.

And to make sure at least not causing more problems, you should consult the manufacturer’s documents or practice several times before intervening.

If you do not ensure both of the above factors, it is best to call a mechanic to repair or rescue if problems occur on the way.

Tools Needed To Remove The Ignition Lock

Tools Needed To Remove The Ignition Lock

Here are the essential tools for unlocking. In addition to these devices, you can also use many other tools to simplify the operation process.

Screwdriver and extractor bits

A screwdriver is one of the essential tools in car repair. Because we can’t use it to screw the screws to fix the details together, but we have to have a screwdriver to do it.

Here it is best to use a screw that can replace many types of heads. The main reason for this is that there are quite a few different screws on the car, and it can be annoying to carry too many screwdrivers.

Power drill

It will take a lot of intervention to get through the lock’s outer shell, and that process will require specialized drills. Here it would help if you chose electric drills to save time and effort and increase working efficiency.


Not only screws but nuts also appear a lot in the mechanisms related to the lockset. So don’t forget to bring wrenches of different sizes when breaking the lock.

How To Remove Ignition Lock Cylinder Chevy Without Key?

How To Remove Ignition Lock Cylinder Chevy Without Key
With a key that can be inserted, removing the ignition lock should not be difficult. However, if you accidentally lose your key or can’t find it, the following steps will help you.

Step 1

First, you need to unplug all the wires that connect the lock to the car’s electrical system.

Since we will be interfering with the safety, disconnecting the power will help protect the system and yourself. Many car models today use high voltage batteries, and it would be dangerous to leak.

Step 2

This step will use a screwdriver and wrench to remove the steering wheel from its original position. Because the locking system will be behind the steering wheel, only when we remove the steering wheel can we access it.

Depending on the vehicle type, there will be different ways to remove the steering wheel, so you need to refer to the instructions from the manufacturer not to affect other parts.

Step 3

After we have finished handling the steering wheel, we will remove the wiper and indicator switches in turn, which are switches located in the same position as the steering wheel.

Next, you need to pull lightly to separate the entire steering column. At this point, the ignition switches will be exposed, and we need to remove them all to complete step 3.

Step 4

In this step, we will proceed to remove the screws or bolts located on the ignition lock.

In addition, you also need to manipulate the bolts located on the housing and cylinder housing assembly.

We will have to deal with all the details that connect the key set to other information.

Step 5

You’ll need something small but sturdy enough to insert it into the lock slot, like a paper clip or a small screwdriver.

Once the tool is inserted, the necessary action will be to turn the lock assembly to the left to completely lock the cylinder, preventing the ignition process from activating.

Next, place the flat head screwdriver in the lockset and pull it to the right. As soon as you feel that the screwdriver is too stiff and can no longer draw, quickly remove the tool used to insert it earlier to the right.

Step 6

Finally, if you follow the steps correctly, you need to slide it lightly, and the lock will detach from the frame easily.

Cost To Repair And Replace The Lock

A rough estimate is that the repair and replacement of a set of locks will be in the range of $300 – $400. You will spend about $70 to $90 for labor costs and from $149 to $164 for replacement parts.


Through today’s article on how to remove ignition lock cylinder chevy without key, I hope you can improve your knowledge about ignition lock and the necessary operations if you, unfortunately, fall into adverse circumstances.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *