Home » Car » SOLVED! How to reset abs light on dodge grand caravan?
how to reset abs light on dodge grand caravan

SOLVED! How to reset abs light on dodge grand caravan?

The ABS light is one of the alert signs on the dashboard of your Dodge Grand Caravan. The light serves as a notification that needs to be recognized by the driver to have a safe trip.

However, there are instances where the ABS light does not seem to function well or needs a reset.

Now if you want to find out how to reset the ABS light on a Dodge Grand Caravan, this article is just for you!

What is ABS?

The ABS is an acronym that stands for the “Anti-lock Brake Skid” or “Anti-lock braking system”. This is an automated system installed on both air and land-based vehicles.

The modern system of ABS was invented in the Flat Research Center by Mario Palazzetti or ‘Mister ABS’.

How does an ABS work?

The Anti-lock braking system releases the pumping breaks of the vehicle. Every wheel has an installed sensor that recognizes locking, motion, or skidding.

It helps to avoid the occurrence of locking up the wheels and enhances steering control when braking, hence keeping a tractive connection on the road’s surface and allowing the driver to take over the vehicle.

What does the ABS light mean

What does the ABS light mean?

When the ABS light from the dashboard is switched on, it means that the car computer recognizes that something is going on with your vehicle’s braking system.

Remember that this should not be taken for granted, assure a safe time driving and solve this problem right away.

There could be reasons behind the turned-on ABS lights such as the system is off, there is a faulty system in the ABS module, a broken wheel speed sensor, or a decreased level of fluid in the reservoir.

a. The system is off.
Did you know that you can switch on or off the ABS and traction control system? If you happen to accidentally turn it off, the computer automatically signals the driver that one of the safety features is off.

Consult the car dealer or an expert or check the manual to identify the switch options to activate it.

b. Faulty system in the ABS module.

Since the ABS works with the traction control system, if it detects something odd, it automatically disconnects the power on the engine until it becomes stable again.

But, there are times where the command of one system interferes, causing the traction control light to affect the ABS by lighting it up.

The suggested response is to consult an expert to properly diagnose and identify the source of this issue.

c. A broken wheel speed sensor.

If the wheel speed sensors detect abnormality in your car, the traction control system will compensate for the power to keep up with the wheels.

The only downside of this, if the wheel speed sensor is damaged or malfunctioning, it cannot do its job properly. Hence, it will disable either ABS or the traction control system until the problem is fixed.

d. Low level of fluid in the reservoir.
Monitoring the fluid level of the brake is essential to keep the power of the hydraulics functioning. A decreased fluid level in the reservoir prohibits the brake pads to halt the car, which is dangerous. If the computer sensors detect the problem, it sends a signal by turning on the ABS light.

Is it safe to travel when the ABS light on a Dodge Grand Caravan is switched on

Is it safe to travel when the ABS light on a Dodge Grand Caravan is switched on?

It is simply not safe to drive a Dodge Grand Caravan when the ABS light is on. Even if you are not used to looking at this signage on the dashboard, having a faulty ABS or traction control system is not good.

The sensor keeps you alert about something important from your vehicle and helps you to avoid accidents on the road.

What are the steps to reset the ABS light on a Dodge Grand Caravan vehicle?

In resetting the ABS light on a Dodge Grand Caravan, follow the simple guide that will be discussed.

The first thing to do is go to an area like an open field or a parking lot where you can enact the procedure.
Start the engine while strictly keeping the foot on the brake. Next, turn the steering wheel of the van to the right side.

Switch the vehicle to driving gear while still stepping on the brake pedal. Then, simultaneously ease the brake slowly and pull forward while straightening the wheel.

If the car is already in a straight position, you can now take your foot off the brake. After that, take a turn and step the brake again.

Repeat the steps until the ABS has been reset. Note that the method only works if there are no codes set.


As part of the driver’s responsibility is to make sure that the ABS light is checked. Even though other people neglect this, the ABS light or warning might save your life.

Resetting the ABS light restarts or fixes some issues regarding your Dodge Grand Caravan. We hope that the technique shown on how to reset the ABS light has significantly helped you.

Finally, if you are having second thoughts or did not successfully reset it, go to the nearest car shop and consult an expert to resolve this problem.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *