Home » Car » How To Rev Your Engine: 3 Easy Steps To Get Started
How To Rev Your Engine

How To Rev Your Engine: 3 Easy Steps To Get Started

Rev the engine is a familiar term for those who own vehicles. Vehicles such as cars and motorbikes all use engines to move. If you are an enthusiast about techniques related to cars and especially cars, it is undoubtedly impossible not to know this term.

However, there are still many experienced people who do not know the steps to rev the engine. The following article will introduce you to the knowledge about rev the engine of the car and 3 specific steps.

What Is Rev The Engine?

Basically, rev the engine can be understood as you will press the accelerator pedal when the car is in a parked state. When you do this technique, the internal fuels will transfer to the components and help them work faster and smoother.

Not only that, rev the engine makes your engines work at full capacity. You will feel like your car is running on the highway at great speed.

In addition, when revving the engine, the engine sound will be extremely loud. You will feel like the car is roaring and may create smoke if the wheels are in contact with the ground for too long.

Why Do We Need To Rev The Engine?

Why Do We Need To Rev The Engine
When the car is in a state of inactivity for too long, the amount of oil received into the engines is not enough, which will make the car difficult to move and, worse, stall. Therefore, you can use this technique a few times to warm up the engine and make the car work normally.

In fact, when in professional car racing, racers often use this technique before the competition. They will start to heat the internals, thereby helping the engines pick up fuel faster. Thanks to that, the car will operate smoothly and without any technical problems.

3 Steps On How To Rev Your Engine

The steps to rev the engine are very simple. These include the following 3 steps:

Step 1: Start the car

First, you need to make sure your car is working. Your vehicle needs to be on before you can proceed with the following steps. Starting the car is extremely important because the next steps will be meaningless if you don’t turn on the engine.

Step 2: Wait for a few seconds

After the vehicle is started and ready, wait for a few seconds for the engines to operate. Ideally, it would help if you waited about 10-20 seconds.

The waiting will allow the fuel to transfer energy to all the internal components. Not only that, if the engines are left idle for too long, the oil inside the car lubricates those engines and prevents damage.

A note for you is to regularly check and ensure your car does not shut down during the waiting time. Because if the car suddenly stops working, the engines will also stop, and the fuel cannot get to all the components.

Step 3: Press the accelerator pedal

Pressing the accelerator is the final step to rev the engine. After waiting for 10-20 seconds for the fuel to flow inside the engine, slowly press the accelerator pedal. At the same time, you shift the gear lever to the intermediate line. You will feel the machines and car sounds are working better after making this move.

Please note that you should only press the accelerator pedal slowly to increase the RPM needle. Always pay attention to the needle line and do not let it rise to the red level. Because doing so will make the condition of your car worse.

After you feel that the car can operate properly, you can slowly release the accelerator and start driving as usual.


Should I regularly rev the engine?

The answer is no. We do not recommend that you regularly rev the engine. Using this technique is not a bad thing, but it is not suitable for internal engines.

In fact, rev the engine doesn’t do much for your car. Many people abuse this technique to make noise to attract people and brag about their car.

But if your car has not been in operation for too long, you should also rev the engine so that the car can continue to use. It would help if you only used it about 1-2 times per year.

What is the harm when regularly revving the engine?

How To Rev Your Engine
As mentioned above, doing rev the engine is not suitable for your car. On the other hand, using this technique often will cause the internal motors to overload and damage the machine.

  • The harms of doing this technique too often and unnecessarily are
  • Putting too much pressure on the engines.
  • The car’s starting sound will be louder than usual.
  • Consumes a lot of fuel.
  • In the long run, the internal components will not be usable.
  • If you deliberately press the accelerator pedal above the red needle line, the car will stop immediately.
  • Therefore, do not take the risk of doing this technique regularly if you want your car to change the entire engine.

When the car is parked in the garage, is it possible to rev the engine?

You should rev the engine while parking in the garage. Doing it inside the garage is your safest bet.

When using this technique, you will most likely push the accelerator too hard and cause the car to move forward or backward. If the car moves, it will cause unnecessary accidents. In addition, you can also avoid annoying noises that affect those around you.


Rev the engine is your way to help your internal engines work better. But do not overuse this technique too often because it will cause harmful harm to the car. Make sure you only rev the engine when necessary.

If you are a sports enthusiast and love to hear the engine work, rev the engine is the action to satisfy that passion. Hope the above article has helped you gain more practical knowledge about rev the engine technique and how to do it accordingly.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *