If you are a Toyota driver, you might have struggled with the player at times. We have received many questions about Toyota cd player error 3. It seems to be a popular problem, but many people do not know how to fix this error properly.
Do not worry! We are here to give you a helping hand. This article will provide you with the most concise answer with explanations. Let’s check it out!
Toyota CD Player Error 3 – What Is It?
Meaning Of The Error
Before learning how to fix the Toyota CD Player Error 3, understanding what it is first is a must.
How to know if you have this problem? When this fault occurs, you cannot reject or play any of your CDs, and the system will show you that you are having the Error 3.
“Error 3” means there is a mechanical malfunction with your CD. Specifically, the system application or component goes wrong, leading to failure to read your CD.
The number in the error name contains information that only the manufacturer and system can decipher. Therefore, it is hard for people who know little about technology to pinpoint and repair that error.
Causes Of Error 3
Identifying the causes of this error will help you thoroughly understand the malfunction to solve it completely.
The main root of this glitch is the system operation’s malfunction. It may be due to your wrong or failure when installing or uninstalling the no longer valid software in your Window system.
Virus or malware threats can also lead to system malfunction. Moreover, the error can happen if you shut down your system improperly or your device has power failure. Besides, you may accidentally delete an important file or registry entry.
These are the reasons why you have Error 3. And now, let’s continue reading to find out ways to tackle this problem.
How To Fix – Step By Step
Error 3 means the player has mechanical issues, and you need to reset it. If you do not want to buy a brand new CD player, follow our steps!
Step 1: Cleaning
Firstly, you need to prepare a screwdriver to remove the player’s screws. Then, wipe off all dirt, debris, etc., that stuck inside the machine, making it fail to work.
You can blow the dirt with compressed air. However, you should never spray water on it since it can cause damage to your device.
Step 2: Wiping the laser
Sometimes dirt on the laser lens prevents it from reading your CD, which leads to error 3. To fix it, take a cotton swab and soak it with water or alcohol. Then, wipe the laser eye of the CD player until it is shiny again.
Step 3: Checking the fuse
If the fuse breaks down, error 3 will happen. In this case, you should purchase a new fuse and replace the broken one.
Step 4: Lubricating
Besides laser eye and fuse, you should also check the gears. If they are not lubricated, use spray oil to grease them to make them work smoothly.
Step 5: Reinstallation
Now use the screwdriver to reattach the device. And it’s time to test the CD player to make sure it works or not by inserting many CDs. If the machine can change the CDs, congratulations, you have successfully fixed the Toyota CD player error 3.
In A Nutshell
Now we bet you know how to fix the Toyota CD player Error 3. When it comes to mechanical, it is never an easy task troubleshooting and fixing errors.
We hope you can successfully solve the problem with Error 3 after reading our article. If you have any other related questions, please leave a comment to let us know and give you the best answer!
My device is A51814. One day, I couldn’t eject CD. I’ve pulled it out using the tweezers. Now, when I try to insert CD I hear some mechanical is working inside, but CD cannot be inserted or ejected.
What to do? Is it fixable?
Thanks.
Hello Victor perlov,
Unfortunately, the alarm sound is not good, you can go to the nearest service shop to have the drive checked. It’s an easy fix that any skilled craftsman can do. good luck guy.